Brushless motor coil lead has 3, Holzer lead has 5, the 8 lines must correspond to the corresponding controller lead, otherwise the motor can not rotate. Generally speaking, 60 degree and 120 degree angle of the brushless motor, need to be corresponding to the 60 degree and the 120 degree angle of the brushless controller to drive, the two phase angle controller can not be directly interchangeable. 60 degree angle of the brushless motor and the 60 degree angle controller connected to the correct connection of the 8 lines, there are two, a positive, a reversal. Because the brushless motor for the 120 degree angle, by adjusting the phase coil lead and hall lead phase, the correct wiring 8 wires connected to the motor and the controller can have 6 kinds, including 3 kinds of connection of the motor is transferred, the other 3 connection motor reversal. If the brushless motor shows that the phase inversion, brushless controller and brushless motor is matched, it can be turned to adjust the motor: brushless motor and brushless controller, Holzer lead A C exchange connection; at the same time will exchange connection and brushless motor brushless controller of the main line, A B. If you want to know more information, please visit: www.959suncity.com
